With the new bikes hitting the showroom floor we have had a full year to put the new KTM WP XPLR suspension through it’s paces. As the budget for suspension tightened up it is clear that we will see some shortcomings from the performance and modifications will be necessary for the serious rider or racer. Some issues to address will be the effectiveness of the fork compression adjustment and the long term durability of the shock.
With the 4CS a thing of the past we are on to a redesigned open chamber fork. Keeping with the single adjuster theme WP adjusts the XPLOR on the top with rebound and compression adjuster. Some models come with external pre-load adjusters. We have found the compression adjuster to make very little difference through out the range and the fork lacks sufficient dampening control for any aggressive riding. With most of the damping control isolated to the rebound side the compression side has a plunger style adjuster. This plunger valve body has an adjustable port area and an open cartridge via 4 holes just below the cartridge rod bushing. The plunger can never be totally closed off or else the fork would hydraulically lock out. This is a simple and not very effective design. The more parts they can leave out the lower the budget can be. Essentially just to get the bike off the showroom floor.
Total cartridge replacement. With high quality fork tubes replacing the lacking internals is a viable option. MX-TECH has designed and tuned a really nice complete cartridge fork that comes with necessary springs. LINK
Dal Soggio Sphere is another cartridge kit to replace the internals with high quality parts. Springs are additional. Some modifications are necessary for installation and it is recommended to have a professional install them.
DS also supplies an upgraded kit to add the missing parts called the XP-ONE.
Focused Fork revalve is available but added parts are recommended to gain added compression adjust-ability. Base valves and a 2nd mid-valve.
WP XPLOR SHOCK
WP goes for a lighter and less expensive design for the shock. Down to 46mm this shock is prone to overheating and fading with less shock fluid to control damping. The shock has a similar feel to the PDS as it has a tendency to have a fast rebound and kick up in consecutive bumps. The best solution for the shock is to revalve to correct the high speed damping for square edge bumps. Increased capacity by adding a TANK from MX-TECH. This will help keep the shock cool by lowering friction and adds overall oil capacity. The tank replaces the OEM plastic piston with a coated aluminium unit.
The second piston design has been simplified. Instead of the bottoming needle there is now a Ohlins or MX-TECH style piston and cylinder to aid in damping for the last part of the stroke. Along with the new piston there is a check valve.
If you have any questions or need to set up an appointment feel free to call us 661 252-0269.